Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   MK1 Focus (
-   -   HID Headlight issues. Ideas? (

CSOleson 08-21-2012 01:22 PM

HID Headlight issues. Ideas?
A few weeks ago I was pulled over for having a headlight out, on my way to walmart. So I bought what I thought was the proper headlights, when and took everything out to replace them at 1 am, only to find that they are aftermarket headlights. So I ordered the HID D2S for my hella HID kit that is in the car (put in the vehicle by the previous owner).

I got the headlights (a pair to replace them both at the same time) and first replaced the left side, the side that was out. I put in the new HID light and it worked right away, making sure not to touch it with my hands. I turned the car off, went on to the other side, replaced this light, turned the car on, and nothing. Both sides were now out. Confused, I tried putting the old one back in. Nothing. After trying over and over to see if I screwed something up, I tested the fuses a few days later. All of them were good. If I turn on the lights (even though they don't actually turn on), the right turn signal does not work, but with the lights left off, the turn signal blinks quickly but still works.

If it isn't the fuses in the fuse box, is there an inline fuse? What else could cause this? I've bought a wire tester but I have never used one. How do I use the wire tester to test if the wires are in fact working? I would greatly appreciate any feedback that I can get. I cannot afford to take my card to Ford, as I am a broke college student (not even joking). Please let me know!

Buddy4679 08-21-2012 01:26 PM

Make sure you have both ballasts and igniters plugged in fully.

CSOleson 08-21-2012 01:47 PM

I had double checked both, they are both plugged in fully, with no issues.

wannabe_svt 08-31-2012 11:31 PM

Is it possible they are reversed wired? I had a similar issue with my old Audi. I swapped the wires around and it worked fine. PLEASE CHECK TO SEE HOW IT'S SUPPOSED TO BE WIRED!!! I don't want to be the reason for anything possibly wrong.

CSOleson 04-07-2013 10:56 AM

Just so that way everyone knows that the issue was closed, this was solved when I found out the connector had some degradation in it and the connection was no longer good. Apparently both headlights went out because of them being on the same circuit?

All times are GMT -5. The time now is 10:41 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.