Change wiring - DRL is at 100%
I have a 2002 Focus SE that I bought while I was in the US. When I moved to Canada, I asked the dealer to add DRL as it is a requirement in Canada.
I later realized that the dealer made the following changes :
1) The low beam is being used as DRL
2) The light is always switched on at 100%, as I do not see any difference in the intensity even when I turn the switch from Off to "LIGHTS" position
I want to remove this wiring, so that I can use the Parking lights for DRL.
Any help would be greatly appreciated.
I don't know if this will help, but check this out maybe there is information that will help you understand what to do.
DRL's were always really close to full strength low beams, i would guess %90 of the intensity
Revive of old thread, I have this same issue. The car came from the states do there is no wiring to the R12 Relay. Any ideas?
|All times are GMT -5. The time now is 06:08 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.