Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   MK1 Focus (
-   -   side mirror replacement (

jtc87 02-08-2008 08:37 PM

side mirror replacement
Somebody busted up my drivers side side view mirror. I am going to buy one, does anyone have detailed instructions on hot to remove the old one and put on the new one. It is a 2000 and its a manual mirror, not electric.

DURATECoftheDesert 02-08-2008 08:44 PM

There are a few clips holding the mirror in place, you might half to take the inner portion of the side mirror and pry it out in order to get a hold of them clips. Although I haven't done this myself an auto body showed me how to do it. They said it would take like 10-15 minutes to get everything into shape.

CKA 02-08-2008 08:48 PM

Take off the triangle, just pops off, then locate the 10mm bolt and use a socket, with a long extension to reach it, unscrew and it comes off, but you need to again pop it off.
The mirrors should be plug and play, if powered. Dunno about manual.
Good luck.

illinipo 02-08-2008 08:54 PM

"take off the triangle"

This triangle is on the INSIDE. it is also known at the sail panel. where the mirror adjustment knob or dongle is.

CKA 02-08-2008 08:55 PM

^^Yep, thanks Peter!

Grimmy311 02-10-2008 07:44 AM

You forgot one step CKA, there is a torque screw that also holds the mirror on, its on the inside of the door behind the "triangle", dont break that off otherwise your mirror will fit loose and vibrate when you drive.

illinipo 02-10-2008 10:46 AM

oh ya i forgot that one too.

just a technicality though... its not a "torque" screw.... it is a "torx" screw. T25 I think.

clockwerkj 01-02-2013 12:32 PM

Like a Dummy I dropped the bolt inside the door steel. I need to retrieve it, so should i go thru the speaker hole with a magnet stick or peel up the weather strip at the bottom?

sam fisher 01-02-2013 12:36 PM

Wow , thats a hell of a bump . I think you can get into there by removing the door card. Its not too hard / time consuming

Sent from my SPH-D710BST using FF Mobile

clockwerkj 01-02-2013 12:42 PM

Thanks! I'll try that first. I found a vid on how to cut it back and replace it.

All times are GMT -5. The time now is 07:07 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.