lookin for those who live in the Michigan area
Those really don't look half bad kinda fr500 ish w/smaller spokes.These are a decent wheel that Tirerack just got for the Foci...
<insert decent looking wheel>
Guess it also would depend on how much lower he is too over stock. I think Brent said he gets slight rubbing on sportlines. That's why I was saying I think he'd rubDon't see why that would rub, that's an overall diameter of 24.9 inches which is only .3 inches bigger overall diameter than the 24.6 of the stock svt tires. (215/45R17.)
What offset? Someone should have asked or mentioned that by now.would 225/50/16 work on my 16x7.....what about if I was slightly lowered, would I rub?
Rims belong on a donk. You should be looking for wheels.I think I found my rims
Sent from my SPH-D710 using FF Mobile
hoping to hit 222,222 this week or next week pending the amount of driving I do!As long as you don't go ape shit with the camber it seems legit
Edit: just hit 180k [woot]
Ditto.I used tin snips and cut mine apart to get it off easier when it began rattling.
you spelled Rimps wrong [giddy]Rims belong on a donk. You should be looking for wheels.
I'll have to check when I get home, can't remember off the top of my head.What offset? Someone should have asked or mentioned that by now.
Fingers crossed the carbs don't need to be synced. That's a PITA.Yesterday I made it 3/4 of the way through putting a new engine in my CBR.
just have to re-install the carbs/tank, hook up the wiring and harness and should be ready to fire up (fingers crossed that the 3rd motors the charm)
It ran ok before the whole motor scenario so I'm thinking it should be ok now?Fingers crossed the carbs don't need to be synced. That's a PITA.