- - Trans help
01-23-2013 06:36 PM
i just had my clutch, flywheel, pressure plate, and slave cylandar replaced about 6 months agao. for a while i was having issues with the slave cylandar getting air in the line, i bled it and it was fine. im no longer having this issue but when im declearaing, i hear a rattle from the trans area. iv been told its the pressure plate just loose. any thoughts what it could be? thanks
02-18-2013 07:39 PM
Id check for the simple things first. Cheapest solutions and work your way to the expensive solutions. Look for any exhaust heat shields as this is the most common reason for a rattling up there.
02-18-2013 08:09 PM
What kind of clutch and flywheel did you get put in? If it was an aluminum flywheel then that could be normal has they do chatter, rattle, and make noises. If it's a stock replacement then take it back to where ever you had it done at and see what they say.
02-18-2013 08:10 PM
I also moved this to the Technical Chat area so more people can see your problem.