Accessory Drivebelt Replacement (SPI)
Accessory Drive Belt Replacement (original by TeamFocus)
Vehicles with 2.0L SPI Engine
1. Raise and support the vehicle. For additional information, refer Here.
2. Remove the accessory drive belt splash shield.
3. Lower the vehicle.
Remove the accessory drive belt.
l. Using a 3/8 inch square drive breaker bar in the hole provided, rotate the tensioner clockwise.
1. To install, reverse the removal procedure.
|All times are GMT -5. The time now is 12:23 AM.|
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.