Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   General Forced Induction (
-   -   Boost Gauge Range (

Magus2727 02-12-2013 08:46 AM

Boost Gauge Range
In my build I am looking for a HP range of about 300-350. From looking at peoples dyno posts in the sticky (which not sure why people neglect to put their boost in the post) it looks like around 14-17 PSI would provide the HP gains I am looking for. So would a 20psi gauge be the best gauge to get?

Or since I will likely get addicted to the additional power go with the 30psi gauge so if/when I go with a return fuel system and a few other upgrades to get over the 350ish HP mark it would be one less thing I need to replace?


Jgrove998 02-12-2013 12:01 PM

1 Attachment(s)
The boost levels would depend on your setup; every setup would have different boost levels for the desired power level.

If your looking to 30 psi seriously in the future I would invest in a quality electronic boost controller that would display your boost at any level.

Magus2727 02-12-2013 12:10 PM

I would like to get an electronic boot controller. But plan on putting it in the glove box or some were not noticeable I only plan on changing my boot levels when on the track.

30 PSI is only in the far far future. I plan on starting out small (4-5)psi and slowly ramping up the boost.

Earls32 02-12-2013 03:03 PM

Like Jgrove998 said it all depends on your setup. If you plan on going higher than 20psi might as well get the 30psi gauge, there the same price.

ZXthrizzle05 02-12-2013 10:55 PM

specially if your a beast like chris is

All times are GMT -5. The time now is 09:31 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.