Hey guys I'm about to pick up a Jackson racing supercharger kit with the bbk but the pulley it bad. What size is the pulley and where can I get one. Jackson supercharges website has nothing for the focus anymore.
01-01-2014 07:16 PM
I need one as well. Let me know if you find one please
01-01-2014 11:30 PM
Your best bet is ebay. I saw a few on there that were new. They were like a quarter inch or 1/2 inch bigger(diameter).
01-02-2014 01:08 AM
I believe the bbk pulley is 3 inch. Pulley boys makes them
I have mine but its chewed up. Its marked SVTF and the groove diameter is 2.95. I need to find out if I am measuring it correctly. I am sure the one I took off is for the BBK. Its just a little chewed up and I would rather replace it with new. Belt suggestions? I believe i will need a 105.5 with this pulley. Any input is appreciated. Probably should have posted this in FI but I am a newb. Thanks.
01-02-2014 09:56 PM
2.95 is the size.
i used this belt from napa, i had to special order mine. was about $40 i think