Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   General Forced Induction (
-   -   Question about the SPA wastegate (

drunkyoda 06-12-2012 10:15 AM

Question about the SPA wastegate
Will it go down to 6psi?? or will i need a different spring?

if i need a different spring should i find a 6psi spring or should i do like 4 psi spring and turn it up on the 4psi?

i will only be running 6 psi for a little while because im going to be un intercooled.

now remember the question is about the wastegate spring... not the intercooler. please stay on topic

i actually would like to know what people think about the SPA wastegate also and experiences people have had.

Jgrove998 06-12-2012 12:05 PM

1 Attachment(s)
As far as I know you cannot have boost lower than what your wastegate spring is set for. Unless you can figure out a way to make the wastegate open sooner.

I would probably just purchase or borrow the proper spring for 6 psi to be sure you'll have the proper boost level.

drunkyoda 06-12-2012 12:37 PM

ok thanks i wasnt sure if they were rated min or max.

All times are GMT -5. The time now is 02:28 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.