I got my 9 pin mini-din today wired it up and started logging. In live link analog 1 is going from .019 to .024 back and forth and analog 2 is reading between 2.0 and 2.2 most of the time. I am assuming I am not getting the right signal from analog 1. Anyone have any ideas?
It is supposed to give the same signal that is appearing on the gauge right?
05-06-2010 11:12 PM
You have to do the equation , in the LL Click on commands then choose analog equation then on the right do the drop down and choose the wide band you have , then it should come back as a AF reading vs voltage , you need to do this each time you log
05-07-2010 06:36 AM
Ok thanks Tom. Ill give that a shot. Posted via FF Mobile