Focus Fanatics Forum banner

SVT clutch

1K views 7 replies 6 participants last post by  wm2000 
#1 ·
Im in the process of changing the clutch from my 2004 SVT, im using the luk kit 07-175 which says it includes the following:

6 speed trans.; Flywheel included; Slave Cylinder included; LuK RepSet contains 9-7/16" clutch and flywheel as an upgrade from the original equipment.

Is anything else i need or something thati could change while the trans is out?

-Mike
 
#3 ·
Im in the process of changing the clutch from my 2004 SVT, im using the luk kit 07-175 which says it includes the following:

6 speed trans.;

I highly doubt that the "6 speed trans.;" is included Mike LOLz
 
#7 ·
Fluid and consider the passenger side carrier bearing (which means a replacement axle). ...and the Axle seals as mentioned. Also when was the last time the clutch master was changed? CFM makes a replacement clutch line, mine was getting to the point of ballooning at the flex section last year.

Here's a little info on where to get seals.
http://www.focusfanatics.com/forum/...m-part-axles-seals-transmission-2002-svt.html
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top