I purchased a SCT from CFM for my 02 SVTF. I am not entirely happy with the tune parameters currently installed. Is there anyway, if I were to ship to you the SCT, that you could erase the current tune and install your tune? I have heard good things about your tune, and it's near infinite customize-ability. If you were able to help me out, how much would something like this cost?
10-23-2012 08:15 AM
I charge 150.00 for a full custom tune and FREE tune updates as you add more NA mods and I can help with the datalogging
10-24-2012 09:47 AM
That's not bad at all, certainly not as much as I was expecting.. I know I can't do anything right away. The wife & I are going to Missouri for a month to be with her fam for Thanksgiving, so maybe December or January; but this will definitely be doable. I will contact you when I am ready to do this to discuss my current mods and what results I would like to see. Thank you very much for your answer, and thanks for the very timely response!!
10-25-2012 09:11 AM
11-10-2012 07:25 PM
Similar question. Well, not really. I'm looking at a used SCTx2. Price is low and it's supposed to be unlocked. This was used on a V6 mustang I believe. Can it be married to an SVT Focus? If so, I'd be looking for one of your tunes.
11-10-2012 10:47 PM
As long as it is unlocked you can use it on a SVT
11-12-2012 06:09 PM
Tom, thanks for the reply. Do you have a template/canned tune for stock SVT's? Mine is an 03 5 door, no mods. Your tunes seem to be held in high regard, but what will it do for a stocker?
11-12-2012 10:58 PM
Better idle , better over all every day driveability , better performance , better low end take off
I do custom tunes not canned tuning , I will make a tune for your car with your mods then we will datalog and make sure your tune is safe and that you have the proper tune for your car
11-13-2012 12:16 PM
Will data logging within the Xcal2 be sufficient or will this require dyno time/graphs?
11-14-2012 09:24 AM
x2 is all you need , even if you went to a dyno you would still use your x2 to do the datalogging for the needed changes