Haha I was actually looking at your ad. Do you have the megan street or ez-streets? Im running the regular street ones and I cant get that low! Unless I cut some stuff.
11-17-2012 01:02 PM
I'm running the regular streets. But I swapped out the front coils to eibach 6inch 450lbs coil springs. I'm still running the Megan coil spring in the back, but I'm using the perch from ground control coilovers. The rear perch from the Megan's are suuuuppper tall.
11-17-2012 05:50 PM
Haha yes they are, you gotta link to those perch's? Smart move with the eibach springs, would you just tighten up the spring rates in the front to get lower? I just wanna tuck my rim a wee bit. Runnin eaps.
11-17-2012 06:33 PM
You need shorter springs if you want to get really low. The Megan's come with 8 or 9 inch springs rated at like 360lbs or something. 6 inch springs like mine are perfect. 320lbs to 450lbs will work, all up to how stiff you like your ride. You can always get softer springs like 320lbs to 350lbs and just fine tune by adjusting the firmness on the dampers. Since you're just trying to come down a smudge; just ad 1/4 inch preload on the front coils if you haven't already. That will allow you to come down another 1/4 inch. If that's not low enough, new shorter coils are your only option. The rear perches are from the ground control coilover set up. Just some spare parts I had from my old suspension setup.