Focus Fanatics Forum banner

Duratec swap

1K views 6 replies 5 participants last post by  NX_Focus 
#1 ·
So I've had two SPI engines blow up on me, and my Focus is just sitting in the yard, looking all pitiful and what not. So I think I'm going to find a salvaged 05-07 Fofo and swap out the whole drivetrain. Would this work? As far as I know, the only difference between my body style and the 05-07 is the front-end, but I want to know for sure.
 
#2 ·
Of course it would work... But it will require some money, lots of time, and patience. I believe everything will work as long as you get axles, rotors, etc. You will also have to swap the computer out, maybe the entire wire harness. Not sure, but good luck. Someone on here posted a link to craigslist that had a salvaged 2nd gen focus with the motor. Not sure where.
 
#3 ·
dude look me up.......I've got a couple threads on the Dtec conversion......

you're just gonna have to swap all the wiring....and of course the tranny and engine.

edit: sorry I was FJ surfin....they say that alot. LOL.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top