Going to the 1/4 tomorrow (sunday)
Im headed to Capitol Raceway in MD tomorrow for the 1/4 tomorrow. Last time i raced was at a different track with only intake and ran a 17.4@78 with a 2.1XX 60ft time.
This time i have chopped res., ground wires, and upper tranny polyurathane engine mount. im hoping to drop into 16's cause the temps are also about 40 degrees colder than when i went last.
Anyone have any comments either to agree or disagree with my guesstamate? Or any extra hints to help me out? (im autotragic also)
P.S. anyone who wants to come, im metting about 7 people at the McDonalds around 11:45am. If your in the area come out and show ya stuff!
Good luck but I am not sure if those mods will be helping drop the time much, but then again I have only raced my car on the track a few times so I am not sure.
From what I gather, take out your spare tire and go with as little gas as possible in the tank so to shave off some time for less weight.
yeah i need to do that...spare tire that is lol. and with the gas, i stupidly filled up wednesday and im in college so yeah, that plus not driving that much anymore leads to still full tank. so while im there for however long (like 5 hours) im hoping to see my times slightly SLIGHTLY drop lol
The weather will help a lot. Just make sure to remove a little ballast from the car, and that will help more.
That is a pretty good 60ft you had the last time. I imagine that if you can keep that up or do slightly better, you should have a high 16 on a much cooler night.
The weight from the gas might be an issue, but like I said remove ballast...spare, jack, passenger seat...that should offset the gas pretty easily.
|All times are GMT -5. The time now is 01:11 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.