SVT turbo kit( 1100 miles on it)
I built up a turbo kit over the summer that is now for sale. only reason for sale is I have a chance to get a bigger turbo for a good price, so im going that route.
list of parts
STainless steel , fully tigged turbo manifold with t25 flange.
2.5 inch Downpipe, VBANDED
2.5 inch Off road pipe, V BANDED
All aluminum intercooler piping, 2.5 inches, 3 inch intake
80mm Lightning maf in 3 inch tube
brand new 50lb injectors
Garrett GT28r BAll bearing turbo (1100 miles on it)
All 4 ply silicone couplers
STainless steel braid feed line(4 an fittings)
STainless return line, WITH fittings(10 an fitting)
BRAND NEW tapped oil pan, with screw in fitting
38mm External wastegate with 1.5 inch stainless dump tube
TUrbo XS by pass valve
Relocated IAT sensor near the Throtle body
This kit is bolt on and complete, you will need nothing but teflon tape for fittings, and oil for when you drop the pan.
the ONLY reason this is for sale is because of the bigger turbo im getting, i figured id be easier to sell this and make a new kit.
this kit is fully complete from throttle body to flex, And i will walk you through the instal if you have questions about anything.
on with a few pictures, Can get more if you need.
Asking 2600 dollars plus shipping. This thing will be going on ebay after the weekend at 2800 buy it now if it does not sell here.
I put more into this(considering the turbo is 900 alone) and tons and tons of hours of fabricating
Get an XCAL2 with turbo tune from tom for 329, data log and you have 270whp for under 3 k.
Only have a few pictures, can get more if needed...
Note, All couplers are now black, I was using the blue for fitment
2600 plus shipping, if you need anything to be answered just ask in a PM.
I will have all the pictures of everything off the car after the weekend
Price is firm, its what im selling it for, otherwise i wont be selling it. Please do not bother lowballing me for a turbo kit with this kind of turbo.
how much hp where you making with it?
not sure . I was in the middle of tuning when The other deal came up, As im not finished tuning, the turbo and car have only seen a mear 9 psi.
P.S Also comes with coolant lines for the turbo.
can it work on a non-svt (zetec)?
yes, Since I am providing the orp, youll need an SVT flex pipe( you can pick them up cheap) and a the last bend of the intercooler pipe will need to be changed( you can do this with a silicone elbow and a straight piece of 2.5 inch piping.
send b16sir1991 some more pics. Then we can decide, he is lookin at it for me.
pm sent out to everyone that needed one
|All times are GMT -5. The time now is 02:19 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.