Steeda’s light weight front swaybar for the 2012 Focus is a light weight tubular design. Made from cold formed high strength steel, this bar reduces body roll, improves cornering feel, and improves overall traction during cornering. Directly replaces the factory swaybar. This 26mm bar gives a 55 percent increase in roll stiffness. Powdercoated silver for great looks and corrosion resistance.
55 percent stiffer than factory swaybar
Reduces body roll
Does not require any permanent modifications to car
10-21-2012 08:21 PM
Awesome 26mm f bar. You guys have or working on the rear bars? Or ST rear wheel knuckle/ trailing arm assembly for your ST bar, for people w/ none ST model?
11-29-2012 05:38 PM
The Steeda RSB has been out for a while now.
01-20-2013 02:34 PM
I recently purchesed the front and rear sway bars, i installed the rear on no problem. On the front do you have to drop the subframe and install it, i was looking at it (it came with no instructions) and there is not way to get it out. or remove the steering rack. also, are the nuts torqued to yeild.
01-20-2013 02:55 PM
Yes you do have to drop it and the lower the better to get the stock FSB out; I used the Ford handling pack instructions and they were pretty good, do you have them and if not I will post them here.