Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   BST Archive (
-   -   For Sale: Raceland Coilovers (Mint, Never Used) (

1hotfocus 09-09-2012 12:21 AM

For Sale: Raceland Coilovers (Mint, Never Used)
Interested, how much do these go for new? Never seen em forsale

sent from my sexy nexus 7

1hotfocus 09-09-2012 12:55 AM

Thanks. I looked these up and it says where the front struts assemble to, requires some modification?

sent from my sexy nexus 7

1hotfocus 09-09-2012 02:04 AM

Here is what I've read:

Down the page, it indicates some grinding to get them to fit
sent from my sexy nexus 7

SonicZXIII 09-09-2012 08:18 AM

Yes there is a possibilty the you will have to take sandpaper to the inside of the knuckle and smooth it out or more sometimes it does not fit just right into the knuckle. But well worth it i may snatch these up myself

1hotfocus 09-09-2012 06:21 PM


Originally Posted by codenamev (Post 4344341)
I've never heard of someone needing to do that, a local buddy of mine has them on his 01 sedan and didn't need to sand them at all. Others are running them on here and this is the first time I've seen someone having to do that. But if so as stated in the link, if using sandpaper is too difficult for you then maybe coilovers aren't for you as they take more knowledge then having to use some sandpaper.

Thanks, Rep Given for you.

What are you talking about? Im a mechanic, and by the way the link showed armanduh using a grinder not sandpaper..

Sent from my SAMSUNG-SGH-I717 using FF Mobile

Red01Focus 09-09-2012 08:57 PM

you in the market for any parts?

indy_11 09-09-2012 09:25 PM

you don't need to grind anything. its just it's just a tight fit. all you need to do is pry the knuckle open enough to slip it in there. you can do that using a screw driver. seen it done, was there when it happened the first time.

Red01Focus 09-10-2012 12:51 PM

will do im on my phone so its a pain to try pm's I can send one later but just to give you an idea i have a few sets of wheels a few other exterior parts like headlights a steeda/razzi rear lip

Mile30 09-13-2012 09:59 PM


Originally Posted by codenamev (Post 4343106)
well these are brand new (as stated and shown) but if you want them from a vender they haven't been available from Raceland UK for a bit now for ship to the US but if you can get a vendor to ship them they run about $550-600 after shipping and customs

They weren't that much... buuuuut you can't get this set anymore, so a tad more rare than when people first got on board!


Originally Posted by codenamev (Post 4343146)
Don't know where you are reading that but they are pretty straight forward, no modification needed lol. [confused]

...the top mounting piece slips onto your stock top strut mount as your top hat. Armanda has a thread on here about them, she is who I found out about them from.

If you get them get new strut mounts! they're hella-cheap and the car could make noises if you reuse old ones... and here's another pic-heavy write up on the install:

koke'sfocus 09-14-2012 02:19 AM

I did grind my knucles alittle bit u can do it pretty easy and yes this are rare they dont do them anymore thats why i bought some ta-technix they are basicly the same but i like better the ta's
Posted via FF Mobile

All times are GMT -5. The time now is 02:03 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.