I just finished parting an 02 SVT that spent its entire life in Ga, meaning no rust. I figured I'd post these up for any northern guys that have a crusty frame on a car they're trying to make nice. The bolts still had their cad plating on them and again, NO RUST! I can get pics if there is any interest. $50+shipping on each
08-25-2011 12:12 PM
08-26-2011 12:07 PM
Any chance they are still in ga? I'm interested in the rear.
08-29-2011 09:04 AM
I need the Front! Why was car parted? Shipping to 61801?
Sent from my ADR6300 using FF Mobile
08-30-2011 12:17 PM
Looking for an update. Do you still have these?
08-30-2011 12:48 PM
08-30-2011 01:02 PM
I would take a look at the pics of the rear.
09-01-2011 01:54 PM
Update: guys I've still got them(in NC) but I've been super busy lately with school starting back and moving to a new house. I'll get some pics when I'm settled, in, it might just be a week or 2 before that point. The car was parted because it was rolled and had a popped timing belt. ps I respond to pm's much quicker than the thread. Thanks!
03-16-2012 02:01 AM
Just a question about the rear frame, would this be what I need to install a rear sway bar if not factory installed? I'm referencing the FRPP 2000-2009 FOCUS ZX3/4/5 ADJUSTABLE REAR SUBFRAME
Part #:M-5035-ZX3, do you know if this would be the same thing or would it work? A little confused about how this part works any help you can give is great or if you don't know that is fine too.:)
03-16-2012 10:44 AM
its not the same thing, the FR frame has an eccentric bolt for camber adjustment. other than that this one is the same and would work for adding a rear sway. I'm heading down to Orlando on the 22nd if you'd wanna pick it up, shipping seems to run about $60 for it so it might be easier/cheaper to meet ya somewhere