Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   BST Archive (
-   -   Group buy: REAL Carbon Fiber radio and HVAC bezels (

mlbbaseball 06-29-2011 11:13 AM

Group buy: REAL Carbon Fiber radio and HVAC bezels
Required Info:

company: Custom Carbon LLC
company address: 39573 Schroeder, Clinton Twp, MI
company phone/email: 586-549-4407 and
Start buy group date: June 29, 2011
End group buy date: July 28, 2011 or as soon as i have 12
minimum member participation: 12
Retail pricing: $124.00 plus shipping and handling

Group Buy price on FocusFanatics ONLY: $95.00 plus shipping and handling

as the title says. These are a direct bolt in. These are NOT cheap 3M vinyl skins that are an overlay that you pay like 100 bucks for on ebay. These are REAL Carbon Fiber. and the CF isn't just draped over the bezel. This is a real skin. unfortunately, w/ the complexity of the part, it cannot be made in real carbon fiber throughout. it would cost hundreds. however, this is made w/ a quality that you cannot even tell the difference. I'll let the pictures do the talking!

Anyways, this is not a 1 day process, w/ all the layups, epoxy, sanding, clear coats, etc. it takes about 8 days to produce one of these. Also, i use the thicker carbon fiber, not the thinner cheap pieces, along w/ epoxy resin, NOT POLYESTER resin. Polyester resin looks identical INITIALLY, but will yellow w/in a year badly and will not hold its luster or strength of epoxy resin. Alot of the cheap no name ebay companies use this. cause its about 20 bucks/gallon as opposed to 125/gallon.

The group buy price on these is 95 bucks. That is if you ship me your bezel. if not, i can find you a bezel, say on ebay or whatnot, and i will add the additional cost of the bezel to the 95 bucks, whatever it will be. (I will send you a reciept for the cost of the bezel inside the box when it gets shipped to you) Then i will lay it up and get it ready to go and send you it back.

I'm also currently working on an 05-07 one, but they are proving to be MUCH more difficult.

If you have any questions, feel free to contact me via PM or in this thread.

If you'd like one, please post in the thread and i will add your name to the list. I need at least 12. if doing 12, the cost of the CF is significantly reduced, along w/ the epoxy cause i can buy it by the gallon and not the pint. this is the reasoning behind the group buy. When i get my website up, these will be 124.

so i need 12 or more. if i can get 24, the cost will go down even more, but only by a bit.

1. DirtKonaZX3
2. PumpkinSVT
3. Giancarlo
4. Paladin
5. Iminhell
6. Slow03
7. biker89
8. starfuryt550
9. 07zx3SAP
10. all motor focus
11. mainest
12. eliaslincoln

Here are some pics.

Own2Focus 06-29-2011 11:30 AM

never mind re-read the post.

mlbbaseball 06-29-2011 11:42 AM

i'm currently working on the 05-07 one.

Blue5ive 06-29-2011 12:41 PM

Add my name. Will have money next friday(payday)

Blue5ive 06-29-2011 12:47 PM

Everyone don't forget that a new bezel from Ford is $40+ for SVT and $80+ for silver faced zx3. So this is a bargain considering those cheap overlay stick on kits are over $100+.

mcrcracer 06-29-2011 05:07 PM

Is there any way you could make a single-din bezel?

Tom 06-29-2011 05:42 PM


Originally Posted by mcrcracer (Post 3723611)
There are a lot of people interested in this under the ED discussion. Every time I post a link to this page though, they delete my post.

Anyways, is there any way you could make a single-din bezel?

You can't post in an affiliates forum to promote another sale. Regardless I hope this product takes off so that Brad can create more CF products for the community.

PumkinSvt 06-29-2011 05:55 PM

I'm in add me to the list

Sent from my PC36100 using FF Mobile

zx360 06-29-2011 06:09 PM

glad to see those surrounds i sent you went to a good cause, dont dis the vinyl wrap overlays though :P

07ZX3SAP 06-29-2011 06:10 PM

I'd be down if you could do 05-07... Also maybe some CF shift boots and e-brake boots? I have a set however the cf is fraying at the base of the shifter knob and would love a new set?

All times are GMT -5. The time now is 04:45 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.