http://www.3dproducts.com/HD-Nitro-Seal.html
Bought this about a month ago with hopes to apply soon. Just got around to it yesterday.
I did a one step polish to make sure all the previous sealant and wax was removed, leaving the bare paint surface the NS needs to adhere properly.
Application is a two step system. You apply Part A, which is a thin liquid, allow it to haze somewhat, then apply Part B, thin paste, right on top of part A, thereby mixing them together. After both parts have been applied you then let it cure for a minimum of 30 minutes, to a maximum of several days. Then you buff off. Part A has a very significant "wetting" property. This means that you only need a few drops MAXIMUM to cover the whole car. Part B is a bit thicker, but needs hardly any anyway.
I left mine to cure for about 2 hours for the first coat and 7 hours for the second. VERY easy to buff off even after 7 hours. Left an extremely slick surface. My microfibers slide right off the hood.
Pics:
After one application:
IMG_2964_wm by Lyonsroar91, on Flickr
After second layer. Final Product:
IMG_2973_wm by Lyonsroar91, on Flickr
IMG_2969_wm by Lyonsroar91, on Flickr
IMG_2981_wm by Lyonsroar91, on Flickr
IMG_2990_wm by Lyonsroar91, on Flickr
Money Shot
IMG_2997_wm by Lyonsroar91, on Flickr
Bought this about a month ago with hopes to apply soon. Just got around to it yesterday.
I did a one step polish to make sure all the previous sealant and wax was removed, leaving the bare paint surface the NS needs to adhere properly.
Application is a two step system. You apply Part A, which is a thin liquid, allow it to haze somewhat, then apply Part B, thin paste, right on top of part A, thereby mixing them together. After both parts have been applied you then let it cure for a minimum of 30 minutes, to a maximum of several days. Then you buff off. Part A has a very significant "wetting" property. This means that you only need a few drops MAXIMUM to cover the whole car. Part B is a bit thicker, but needs hardly any anyway.
I left mine to cure for about 2 hours for the first coat and 7 hours for the second. VERY easy to buff off even after 7 hours. Left an extremely slick surface. My microfibers slide right off the hood.
Pics:
After one application:
IMG_2964_wm by Lyonsroar91, on Flickr
After second layer. Final Product:
IMG_2973_wm by Lyonsroar91, on Flickr
IMG_2969_wm by Lyonsroar91, on Flickr
IMG_2981_wm by Lyonsroar91, on Flickr
IMG_2990_wm by Lyonsroar91, on Flickr
Money Shot
IMG_2997_wm by Lyonsroar91, on Flickr