hey guys i kno this is preety straiaght forward and if this was covered alreayd and someon can give me a link that would be great...i dont have time to search today...sorry

i kno there is 4 bolts and the 2 linkages i kno how to get the one with the black clip off the other one on the left i dont kno how to remove...i remvoed the little retainer but i cant get the entire thing off??? hope someone knows what im talkin about...

also if theres anything else please let me kno!

btw im puttin in a CAI i dont have the screws for the MAF supplied by AEM is it ok to reuse the stock screws if not does anyone kno what i need to purschase?? thanks

bump!

I can't help you with the TB, but you can use the factory screws with your new intake. I did and had no problems but you may want to be careful when putting the scrws in because there are a couple of people here that had those screws break on them.

You might want to shoot the holes and screws with a little WD40 just to make sure they go in smoothly.

thanks man..bump for my other question..

http://myfordfocus.com/how-to/65mm.htm try that, and if I think you're talking about the grey plastic piece (kind of rubbery) you're just going to need to pull, it's not that hard to get off. It slides off.