hurtinfocus
11-02-2005, 07:19 PM
im re-doing my tune and i forget if the correction factor for the injector high and low slopes are over the stock injector value or over the 42# injector value....?
|
: tom: maf'ia tunning question hurtinfocus 11-02-2005, 07:19 PM im re-doing my tune and i forget if the correction factor for the injector high and low slopes are over the stock injector value or over the 42# injector value....? 1turbofocus 11-02-2005, 07:58 PM all depends on how you do your tuning , If you have 42`s most do this over the stock injectors but im not 100% sure what your asking or what your tuning with Tom hurtinfocus 11-02-2005, 08:36 PM i am tunning with SCT advantage software and the xcal2. running stock MAFs in your 3"tube with the mafia. i am using 42# injectors. the directions say to adjust the injector high and low slopes as well as the air mass displacement of one cylinder by the correction factor that corresponds to the setting you are using, but it does not say if that is over the accepted value for the size of injector being USED or if that is over the stock values. you answered this question for me back when i did my first tune but that thread is no longer here cause i looked for it. 1turbofocus 11-02-2005, 11:03 PM Over the stock injector size Tom Lil_RedZX3 11-03-2005, 01:15 PM What in the world is "MAFia"? What is the ia for? spool3dSVT 11-03-2005, 03:00 PM Originally posted by Lil_RedZX3 What in the world is "MAFia"? What is the ia for? http://focus.c-f-m.com/index.asp?PageAction=VIEWPROD&ProdID=893&HS=1 | |