focus_smp
08-24-2005, 02:36 PM
tom what pistons can you recomend me for the high Boost, NOS
|
focus_smp 08-24-2005, 02:36 PM tom what pistons can you recomend me for the high Boost, NOS 1turbofocus 08-24-2005, 04:23 PM Weisco , JE , Diamonds , Ross and not in any order , I have used them all and they all do a good job McNews has the Diamonds Tom focus_smp 08-24-2005, 07:06 PM what bore and compresion do you recomend me for the high Boost and nos Stock Bore 9 to 1 3.346 Bore 8 to1 3.346 Bore 8.5 to 1 3.346 Bore 9 to 1 1turbofocus 08-24-2005, 07:38 PM I allwayd do an over size bore either .007 to .020 I would stay with 8.7 to 9.2 depending on what your power goal is Tom focus_smp 08-24-2005, 09:25 PM Where can i buy the pistons with the compresion that you told me and with the .20 oversize because I have looked for them on the internet and haven't found them. 1turbofocus 08-24-2005, 10:20 PM I have them Tom focus_smp 08-25-2005, 03:24 PM ? focus_smp 08-25-2005, 09:32 PM [:D] focus_smp 08-26-2005, 09:20 AM [:(] ? 1turbofocus 08-26-2005, 05:36 PM With rings there 469.00 focus_smp 09-20-2005, 06:59 PM Tom's I have a question, can I mount or if you have done it mounted a crack, rod, pistons on a 2.0 zetec block? 1turbofocus 09-20-2005, 07:52 PM Not sure what your asking Tom focus_smp 09-27-2005, 09:07 PM hey tom sorry, what I was refering to was if you had mounted any 2.0L motor with rod, piston, camshaft of a 2.3 L motor 1turbofocus 09-27-2005, 09:26 PM If you are asking if i have taken a Zetec 2.0 to the stroked 2.3 Crower crank the answer is no Would love to tho Tom | |