05-20-2005, 07:00 PM
With a JRSC kit, i was looken into gettin some 24lbs injectors from ford. My question is are there any difference from ZX3 and SVT injectors when you go to buy them? The kit from ford says 4 24lbs injectors for like 180 which isnt to bad part # M-9593-A304.
Are 24lbs injectors more then enough to handle the JRSC? posibbly with the 3" pully for more boost also.
Tom can you make a tune for the 24lbs injectors and the stock injectors?
05-20-2005, 07:28 PM
I would just get the stock SVT injectors: 30 lb/hr. Better to have a little more than less here.
05-20-2005, 08:58 PM
Do I need 42 lbs injectors because you have a tune with them?? Id like to get a tune off you Tom but I dont really wana upgrade my injectors
05-21-2005, 12:21 AM
You don't need 42# injectors, I think Tom is just looking to gain safety, which is definitely not a bad thing. I know guys running 2.3" pulleys w/ SVT injectors. There isn't alot of room to go up, but really, how high do you expect to take a zetec? I mean, you should also have a J&S, but you don't need it.
I was looking at it from a budget standpoint. Within reason though, you're better off with larger injectors than smaller injectors[:)]
05-21-2005, 02:14 AM
Sorry yea I didnt realize the stock injectors on the SVT were 30lbs which is what I got, So i mean i wana keep the stock injectors and not have to deal with more cash. I JUST NEED A GOOOOOOOD TUNE. i dont wan ahave to use the stock ECU from JRSC
05-22-2005, 01:36 AM
24lb injectors definitely don't sound too safe for that type of a boost setup :(
05-22-2005, 01:43 PM
If it makes you feel better I'm running a set of flow matched 50# injectors. Personally I would go with the 42's, the stock 30's will most likely be stressed to keep up with the JRSC with a good tune behind it[thumb]
I got mine from turbonetics all 4 for $200, pretty good deal I think[:D]