02-08-2005, 01:43 AM
I just mad a turbo kit for my 1999 Ford Escort ZX2 2.0 DOHC, I now need engine managemant. So I am wondering What size is the Ford Focus SVT MAF? And would it be good for a turbo for about 6/7 psi? Also is it 4 wire maf? Or would it just be better for me to get a Mustang MAF? If so what engine size, modle, and year??
02-08-2005, 09:09 AM
I think 42`s are needed here and a 70MM recal MAF
With only 6/7psi you may be able to get by with 30 and SVT MAF but no one ever stays at 6/7 and then your buying injectors again
The SVT Focus MAF is a 6 wire but all you have to do is change the connector
You will still need a chip and tuning to make all this work
02-08-2005, 12:02 PM
What size is the SVT MAF?
02-08-2005, 12:04 PM
Yes this is my plan, I have a Diablo chip, First imma look for MAFand injectors, when I get them, I will send my chip off to have it reburned. Thank You
02-08-2005, 12:05 PM
The chip will make the injectors and MAF work right? And it will retard timing?
02-08-2005, 01:59 PM
they have info on tuning etc. the superchip's focus sport uses are extremely similar, if not the same as the ones for the focus..
Moved to Forced Induction......
02-08-2005, 02:32 PM
ok so... I hear for my boost application, I dont really need MAF, just injectors and chip reburn right?
02-08-2005, 07:05 PM
WRONG, you need a larger MAF , no way around this and still do it safely , If some one tells you otherwise they dont know what there talking about
02-08-2005, 07:52 PM
okay, now thaqt we got that sraight.... What MAF should I use? Focus SVT? What size is it???
03-03-2005, 12:59 AM
ok I found out I need 42# injectors(Ford F-150 Lightning) and 95 Ford Mustang Cobra in which I believe is a V8 302 5.0 70mm maf am I correct?????????
03-03-2005, 06:16 AM
I would go with a 70MM ProM calibrated for the range of those injectors
03-03-2005, 11:08 PM
Uhhhh,,, I said I FOUND A MAF, I was wondering if the information of that I listed about the vehicle is correct.