02-14-2013, 04:46 PM
I need a dohc zetec head. I went to rebuild mine and found out that mine has a crack in it. So if i could get a good head that needs a rebuild for cheap that would be best seeing as I already spent the money on the parts to rebuild mine. Let me know what you have.
02-15-2013, 09:19 AM
if you have time there is a pull a part about an hour's drive north of you in concord/charlotte. you could pull a head and it wont cost you anything but the price of gas and i think about $80 if memory serves. and you can get a "warranty" on the part as well so if you take it to a machine shop to get it checked and its bad you can return it to get your money back. there were about half a dozen or more zetecs down there the last time i went and they usually have a good stock. sometimes you even get lucky and someone has already pulled the head to get at a block or something.
02-15-2013, 09:34 AM
Tomorrow I'm going tojunkyard to pull a ps pumpo and the little yellow tab. For the fuel line to fuel rail. If you want I can pull the head if its still there