01-09-2013, 06:53 PM
I bought a set of Eagle Eye Projector headlights and have DDM HIDs in them. 2 complaints. 1 my high beams worked for a good 6 months popped a fuse and now continue to pop fuses, so they "don't work". 2 the cut off "line" is more like a scoop, so I have them aimed low so I don't blind oncoming traffic. Any solutions would be much appreciated.
01-09-2013, 07:43 PM
They are halogen projectors which is why your cutoff looks like that. Mine does it also. As for the high beams, do you have the bixenon hids? I only have the regular 55w ddm tuning hids and the high beams are not a more intense light but rather the shield that makes the cutoff activates when the high beams are switched on and allows the full light out.
01-09-2013, 10:05 PM
I have the 35W 5000k H9s. The flap worked for the first 6 months then popped the high beam fuse. I replaced the fuse and it popped it again. So sadly I don't know what to do about it.
01-09-2013, 11:44 PM
check all your wiring for shorts causing the fuse to pop. That's why I'm glad I went retrofit instead of eagle eyes though.
The output is a ton better.