I am trying to get my BBS CH's to fit my '12 5dr Titanium. My dilemma is they have a 5x112 bolt pattern and I need to fit them to our 5x108 pattern. The CH's are 18x8" offset et50 and currently have 225/40R18 tires mounted.

I was thinking about using wheel adapters to convert from 5x108 to 5x112, but the adapters are 15mm thick. With the added width of the wheels and the now et35 offset, the question is will they fit or poke and look ridiculous? I could probably have the CH's machined slightly to increase their offset by 2-3mm and maybe get the total offset down to et38.


If anyone can think of other options or shed some light on the wheel fitment, I'm all ears. Thanks!

Tire Rack lists OZ Ultraleggeras in 18x8 et38 as fitting the 2012, so I don't see why yours wouldn't. I doubt TR would list wheels that look silly on your car.

Thanks! I hope they fit. I'm going to try and test fit them tonight with a set of 10mm spacers I have laying around. That will be 5mm less than with the adapters, but at least it will give me an idea as how far out they will sit.