06-02-2012, 08:41 PM
So i am seeing all these threads about the SCT flasher to your AEM wideband gauge. I am about to do an JRSC install and one of the things i have to install is a wideband AEM will i have to do something with the gauge to use the flash device with it. my plan is to either have tom do a remote tune or find a shop in central florida to do the Dyno and tune??
06-03-2012, 08:09 AM
What flasher are you using? You need to hook the wideband up so the tuner can see the A/F ratio. There's a good write up on here, which I'll look for in a sec, that shows how to wire your Wideband to your Livewire. It was really simple to follow. I'll post the link when I find it.
06-03-2012, 08:10 AM
It's actually a sticky in the tuning forum, the first one actually. here's the link any how
06-03-2012, 09:54 AM
i plan on getting the SCT tuner from either CFM or Tom, and the AEM wideband tuner