04-14-2012, 05:28 AM
so i was wondering if anyone could measure the race and stealth pies for me?
the fswerks site says that ....
Will your stealth muffler work on my non-FSWERKS exhaust?
Most likely not. They are made to fit our systems
but i am running a 2.5 system and was thinking about adding the stealth and a header .
04-14-2012, 10:54 AM
you would have to cut your trubenz system... if your cool with that then I'd get the stealth resonator. I had Race/headers and was just tooooo loud. Stealth/headers, good rumble and still audible with decent sound output
04-14-2012, 11:18 PM
Is the Stealth muffler noticeably quiter than the Borla?
04-15-2012, 02:47 AM
if you already have a trubendz then order a front pipe from them.
04-15-2012, 07:39 AM
Im currently in this delima. I have the fswerks header and flex and 2.5 inch exhaust. i had a round magnaflow 6"round by 30" long in the stright pipe section. then had a 4inch round in the next section and it was not ricey. it was a nice pitch and still pretty loud. THen i decided to get a frontpipe from a member on here that has the cat and the resonator from trubendz. my reasoning was because the 6" rubbed a little under the car and im lowered so over very sharp inclines it would scrape a tiny bit. But the main thing is a i wanted a cat because my inspection is in a couple of months. i replaced my front pipe with the cat/resonator one figuring the cat would keep it quiet. No. It is now loud as hell and sounds like a pissed of bumblebee.......
There is not really room anywhere under there to do anything else aside from the rearmost section where a lunchbox muffler would be. So i ordered a vibrant bottle resonator im going to put there when it gets her on tuesday.
i looked at all of the borla mufflers and stuff but none of them will fit in the rear position.
What can we do?
04-15-2012, 11:08 AM
sounds like were int he same boat... i wanna get the header but dont wanna be super loud