GhettoRdneck
02-15-2012, 01:06 PM
Hey guys, i just recently bought MSD wires and the coil and was wondering if anyone had a preference or best spark plug to use on their svt? please let me know!
|
GhettoRdneck 02-15-2012, 01:06 PM Hey guys, i just recently bought MSD wires and the coil and was wondering if anyone had a preference or best spark plug to use on their svt? please let me know! GO.army.1969 02-15-2012, 02:52 PM Autolight copper GhettoRdneck 02-15-2012, 03:07 PM okay sounds good. where do you get them? just like autozone or napa or somethin? Matte Black 02-15-2012, 03:43 PM Autolights are at autozone. I prefer ngk iridiums. macdiesel 02-15-2012, 04:10 PM Motorcraft coppers gapped out a bit. cossieboy 02-15-2012, 04:39 PM Ngk platınum bespurcell 02-15-2012, 05:12 PM SP-463 from NAPA. Gap at .050-.060. Zab 02-16-2012, 06:12 AM Motorcraft coppers gapped out a bit. ^^this! Can't go wrong with oem right? I forgot what the gaping was tho iminhell 02-16-2012, 03:28 PM Motorcraft coppers gapped out a bit. This. AZFS22C / SP-463 Do not use anything but. The NGK's heat range is not the same. Bosch is all around junk for our cars. Champion/AC/etc don't offer a proper fit or heat range for our cars. Motorcraft/Autolite or nothing/problems. BigRed03 02-16-2012, 04:01 PM This. AZFS22C / SP-463 Do not use anything but. The NGK's heat range is not the same. Bosch is all around junk for our cars. Champion/AC/etc don't offer a proper fit or heat range for our cars. Motorcraft/Autolite or nothing/problems. this. x1000. Gapped .055-.060. Smooths out the idle. And the MSD coil is ok...but when it goes, switch back to a stock coil. Theyre proven to 600+ whp....and its cheaper :D ftank29 03-06-2012, 01:29 PM where can u get it at? and brand? 1turbofocus 03-06-2012, 02:21 PM Autolite does not make a plug for the SVT that is correct , any one running them need to check there plugs NGK is scrap metal in my opinion Like stated the Motocraft SP463 is the way to go and gapped at .055 , buy them on line parts places or from Ford Tom shananigans89 03-14-2012, 06:50 PM i'm using denso iridum ITV22 spark plugs from CFM. they say they are stock heat range for the svt. had them for almost a year and have no problems. stromberg2 03-22-2012, 04:15 PM Ok, stupid question, maybe....What is the difference with the sp487, sp463 and sp524? Stromberg2 1turbofocus 03-22-2012, 04:51 PM I would never use a denso plug , by design there a hotter plug sp463 are the only ones with a .980 reach the Focus requires from what I understand Tom shananigans89 03-22-2012, 09:08 PM I would never use a denso plug , by design there a hotter plug sp463 are the only ones with a .980 reach the Focus requires from what I understand Tom what exactly do you mean? and what difference would it make if i were running motorcraft AZFS22C coppers gapped at .055 as opposed to the denso itv22s, which i think i gapped at .045 if i remember right...? SWEGER 04-10-2012, 04:58 PM I went to Auto Zone today to beth the Motor Craft SP463's. They didn't have them but looked it up and brought me an Autolite APP5364 which was supposed to be equivalent. Anyone use these? Good or bad? http://www.autozone.com/autozone/parts/Autolite-Double-Plat-Spark-Plug/2003-Ford-Focus/_/N-jk8uuZ9n80x?itemIdentifier=438165_0_0_ | |