01-25-2012, 06:18 PM
So i just got a some connectors over my batteries repaired or something like that because my engine wouldn't even turn over when I turned the key. It worked pretty good a few times but then one day while I was driving a wire with a thick black box at the end fell out and has been dangling over the pedals. I have some pics I'll try to up load but i really dont wanna take it to a shop if I only need to plug this thing back in. I looked around under there but I didn't really see anything obvious. Someone on here has got to have the answer
01-25-2012, 06:22 PM
the second one is where it comes from. it is connected to the loose wire from that bundle.
01-25-2012, 06:54 PM
It's a switch for clutch or brake. Look over your pedals. You'll find the other half. That's the second one posted this week. I have pics of the switches, but can't post them from my Nook.
Switched to my laptop.
01-25-2012, 07:08 PM
That looks like one of the switches above the brake pedal. It also looks like the plunger is broken. That piece should twist into a hole in the metal bracket above the brake pedal.
01-25-2012, 09:30 PM
When you say the plunger is broken are you talking about the pics I posted? The clutch switch slid in with a good click sound so hopefully its in place for good. Could have easily kicked it out on accident wearing my hiking boots.
01-25-2012, 11:03 PM
It looks like the clutch pedal 2 switch. Looks like the wire harness broke off the pedal switch. I think that switch is for cruise control, not sure. But if you got it back together, cool.