Is it possible to just swap the driver/passenger seat cushion/cover? They look symetrical but I don't know if there is anything in each specific seat that would prevent this.

Unless you have heated seats you can unbolt the seat bottoms from the seat frame and swap them. There are 4 four bolts 2 in the front that face forward and 2 in the back that face down. If you have heated seats you will also need to unhook that but there is no need to remove the cushion or the cover to swap the seat bottoms.

but the tilt leaver and back adjuctment knob will be all backwards

but the tilt leaver and back adjuctment knob will be all backwards

erpauling is correct. The seat cushion itself can be seperated. I have done it myself. There is a little difference but, you can live with it if need be.

but the tilt leaver and back adjuctment knob will be all backwards

There are no levers on the bottom of the seat. They are on the back of the seat. The actual seat pan, cushion and cover or interchangeable. If you have heated seats you may have to reroute the wire through the other large hole on the bottom of the seat pan, but other than that they are the same.

Thanks for all of the info guys. I swapped the seat cushions today without any problems (except for a POS 10mm socket that exploded on me; I guess you get what you pay for!).

Wow! What a difference. It feels like a brand new seat. I should be good for another 10 years....