|
: Want to swap ztech motor in my 02 SE SPI 1990 GT-X 12-30-2011, 03:08 AM Can anyone give me a list as to what i would need everything to do the ztech swap? or does anyone have a great write up on this here on the forum. Thanks. My car is an 02 spi and i want a ZTECH engine instead of the junk. Please help me out. Thanks xShiFTx 12-30-2011, 09:26 AM Use the search, there is tons of info already on the forums. If you have any specific questions then come back and ask them! jjzx2sr 12-31-2011, 07:22 AM I am doing a Zetec swap in my 01 SE currently so i can give yah a pretty complete list. The engine and transmission mounts are the same, although the large metal bracket that the passenger side engine mount bolts to is different between the SPI and Zetec. What you would need, besides and engine is. PCM Zetec engine harness, the harness runs all the way back to the fuel pump, so its a good idea and saves a lot of work to splice in a connector but near the passenger side kick panel. The cooling tube on the rad support Power steering hoses Air intake and etc Throttle cable assembly Need a Zetec cat and flex pipe. I will add to this list as things come to me... I have most if not all you need to perform this conversion if you find you need something. | |