Anyone know of a link on how to install new bumper lights on a Foci?

Seems simple, there's 2 hooks on either side of the housing, I think I'm going to use a screwdriver and just pop out the old ones, snap the new into place? Does this seem logical or is there a better way to do it?

If the SVT is anything like the ZX3 then its very easy, use a 13mm socket to unbolt the two bolts underneath the bumper. Turn the the bulb socket counter clockwise and it should come right off. Then pop the new ones in and bolt them back up.

yes.. It's the smae for the bumber lights... They have a cheap nut on the inside you need to unscrew 1st!