09-25-2004, 06:50 PM
a while ago someone wanted to know about a stand alone turbo oiler, i found this
http://www.racerpartswholesale.com/mocal1.htm if you use this to plumb it you don't need to tap or drill holes in the motor. Be sure to incorporate a oil cooler if you do this, as the oil gets very hot when a turbo is spooling at 25k rpms.
09-25-2004, 08:19 PM
thats a nice item.. alot of uses too.
09-25-2004, 08:29 PM
i like it, its the way to go, also it wont raise you cars oil temp. if i get a turbo i'll buy one.
09-27-2004, 12:24 AM
wow, thanks. I appreciate it :)
SVT ewx ca
10-28-2004, 01:54 PM
Does that mean there are no oil lines running to/from this unit? Its self contained? I dont get it..
03-13-2005, 10:33 PM
I've been looking for one of those for a long time with no luck at all till now.... Good find..............ppl thought i was crazy when I'd ask about somthing like that
03-14-2005, 07:43 AM
You hook that to your turbo and there will be a 100% failure rate
Turbos need oil PSI to come up and go down as the RPM does , Adding a pump like this will only mean more switches , Elec wires Oil Res. , oil lines to cause more problems
Keep it simple , there would be no gain to doin this with a turbo