03-11-2011, 11:41 AM
Hey guys I just put a remote starter in my 03 focus and now it won't start with the key but the remote starter works fine but when I get gas it won't start at all now is that because I did not hook up the factory disarm wire but the 03 focus has no disarm wire so,what do,I hook it to please help me thank you.
PS I am new to this forum so any and all,help will be greatly appreciated.
03-11-2011, 12:02 PM
http://www.the12volt.com/installbay/forum_posts.asp~TID~25684 is for 03
03 says there is no disarm 00-02 says its blue/light green in drivers kick panel. now im not sure if this goes by model year or build date but i would see if you have that blue/light green wire and test it (multimeter and use the oem fob to unlock the doors and see if its pulsed and the polarity)
03-11-2011, 12:33 PM
Ok thanks ill try it and let you know and by the way How do I know if its the right one how do I test it
03-11-2011, 01:47 PM
you would stick a prob from the multimeter into the wire and then the other probe to ground lock the car, wait 5 or so min then hit unlock and see if the multimeter picks up anything. if i can remember when i did my alarm/remote start it should be a ground pulse.
03-11-2011, 01:49 PM
ill see if i can dig up the wiring for my 04 as some of the wires were different from what i found online, mainly it was the GEM pins for the door triggers but ill give a look and see what i have.