12-21-2010, 12:42 PM
Hi guys, just wondering what are my options out there if all possible a clutch kit (pressure plate & clutch disk) that are capable of holding 450-500HP. I'm hope that there is a clutch kit out-there so that I can reuse my fidanza flywheel. This is for a ZX2 Transmission.
12-21-2010, 01:32 PM
My clutch masters stage 4 has held 400 daily driver and over 500 on racegas
12-21-2010, 02:04 PM
Got the same one, on Fernando's car it has hold 608hp.
12-21-2010, 02:13 PM
The Clutch Masters have their FX400 (Stage 4 I presume) rated at 170% over stock.
So theoretically if the stock clutch can hold up to 250 LB/FT than this one can go up to 357 lb/ft.
What I have now is a stage 3 clutch kit from SPEC, and they rate it at 300 lb/ft.......How true are these numbers, I know the manufacturers post their numbers 60%-80% of the ultimate capacity, but I still don't get what to expect out of a clutch.
12-21-2010, 04:18 PM
Competition Clutch Stage 5. Its what we use in Jared's car, doesn't slip.
We sell them if you are interested.
12-22-2010, 09:50 PM
I currently have a Competition Stage 5 clutch but haven't drag raced it yet. I had the Exedy Hypersingle Stage 3 but it burnt out pretty fast in my application.