69Hcode
10-08-2010, 08:03 PM
What size allen is needed for the flywheel bolts on my svt? I have a 1/4" allen socket for my rocker arms but I'm sure the SVT is metric. Should be doing my clutch/input shaft seal next weekend.
|
69Hcode 10-08-2010, 08:03 PM What size allen is needed for the flywheel bolts on my svt? I have a 1/4" allen socket for my rocker arms but I'm sure the SVT is metric. Should be doing my clutch/input shaft seal next weekend. vaboom123 10-09-2010, 11:08 AM It's a torx head bolt. I believe there are 6 of them. You should replace them each time you remove the flywheel. The bolts ran me about $17. I can check the exact size when I get to work on Monday. vaboom123 10-12-2010, 01:29 AM T55 Torx 69Hcode 10-12-2010, 07:53 PM Thank. Pretty sure I have one of those vaboom123 10-13-2010, 01:58 AM No problem. It probably wouldn't hurt if you have an extra on hand. It always sucks to break a torx and not have a replacement. It wouldn't hurt to have an strong 3/8" or 1/2" impact to get the bolts out. | |