09-06-2010, 12:26 AM
ok just got a new turbo manifold and FMIC and piping along with BOV and W/G with 7,8and 9lb spring, now i need a turbo i'm not lookin for 325hp but around 200 will be fine for my 2.0zetec, there are so many diff turbo's a/r don't know which one to use any help would be great, also should i install injector's and if so will the ecu take care of the air and fuel or will i have to but a tune,,,,thank's,,,keith
09-06-2010, 01:08 AM
just use a gt28r.. quick spool.
09-06-2010, 08:30 AM
Yeah, definetly have to get a tune. Look up Turbo Tom. He will get you headed in the right direction. Just got done tuning my ride. He has my engine running really good. I have the same power goals you have. I will be going to the dyno soon. At around 12 psi on my set up, I would have to guess I am right around 200- 225 hp. But we will see.
09-06-2010, 09:14 AM
I'd run something small like a T3
And yes your gonna need injectors and a tune.
09-06-2010, 07:15 PM
ok thank's for all the reply's, been going thru a few post and other web site's and some say that they just installed the turbo and injector's and there havin some fun. i want to for sure get a tune how is it done, do i buy a programmer then have to buy the program or download. this is my first EFI i have never done a turbo for EFI but done a few carburetor blow-thru's and a lot of root's type carb S/C but never a FI. will i be able to still drive the car with the turbo and the green 42lbs injector's until i can get the programmer, i'm still lookin for a turbo and don't know what size to get, please someone tell me what turbo i need i know there are many to pick from but i don't know what A/R to use with a stock 2.0 zetec.,,,,,thank's,,,keith