08-26-2010, 12:12 AM
The pulley on my jrsc needs to be replaced. The key / keystock wore a large grove in it.
So can the old one still be used just machine a new grove?
And for the key / keystock what's gotta be done for this?
Thanks in advance
08-26-2010, 12:25 AM
If the stock pulleys on the 45 and the 62 are the same, you can have mine. I'm not using it.
08-26-2010, 11:18 AM
the stock pulley on the m45 is actually the bbk for the m62!!
08-26-2010, 11:53 AM
I posted in another thread, not sure if it was yours. I have a stack of pulleys if you need one. 2.5", 2.6", 3.0", and 3.6". PM me.
Posted via FF Mobile
08-31-2010, 06:43 PM
I need to replace the belt now since im doing this. Dont feel like trying to match up the size
here is the number that i found for it while searching
Belt # is 6PK2705
Now is that a 106.5 " belt for the jrsc with the standard 3.6" pulley?
bc only thing i found looking on here is the BBK pulley size
08-31-2010, 06:50 PM
i used the 106.5 with my bbk set up
08-31-2010, 06:56 PM
ok. so its def not for the standard kit then..... great. now i just need to find out what the standard size is. sounds like ill be trying to compair the belts tomorrow at the store unless someone knows the non BBK size
08-31-2010, 07:24 PM
So was that the wrong pulley then?
08-31-2010, 07:33 PM
disciplerocks whats the smallest pulley do you have?
08-31-2010, 08:00 PM
Not really wanting to part with any more.
08-31-2010, 08:08 PM
no it was the right one.
i just need to replace my surp belt. its old and cracked alot
08-31-2010, 08:42 PM
No problem. Glad I could help.