08-23-2010, 10:48 PM
I just recently bought a 2010 focus ses, and i love the fog lights and bumper cover it has on it but the fog lights are pointed so low i can barely see them over my hood
im not looking for them to point strait up i just want to get an inch or so up so they actually might be useful
i was wondering if anyone knew if they are adjustable so that i dont rip apart the underside of my front end to find out they are not lol
08-23-2010, 11:11 PM
There should be. I havent seen those fogs yet but im sure theres a way. Check under there and see if theres something you can turn.
08-24-2010, 02:12 PM
if not washers will let u put a slight adjustment on them
08-24-2010, 06:04 PM
Just installed 5000K HID's in my fogs. I can tell you they are adjustable. There is a adjustment screw on the back side when looking directly up at the fogs, from under the vehicle.
08-25-2010, 10:43 PM
That's good to know. Currently installing ddm 6k's in mine but they aren't turning on for some reason. Anyone have tips? all wires hooked up.
08-26-2010, 02:25 AM
Yah that is good to know about the adjustment cuz mine are too high and people keep flashing their lights at me. very annoying.. As far as your hids not working. Re check all your connections an grounds again and anything that you may have spliced together. I had the same problem and mine was a bad ground. Hope that helps.
08-26-2010, 02:28 AM
DDM is plug and play for the fogs. No ground wires to connect to the frame and no splicing needed.