drunkinmonkey
08-15-2010, 10:06 AM
hey guys im gonna be running about 10lbs on low boost and about 16-18 on high boost what spring would i need to handle both of these the wastegate is a tial mvs
|
drunkinmonkey 08-15-2010, 10:06 AM hey guys im gonna be running about 10lbs on low boost and about 16-18 on high boost what spring would i need to handle both of these the wastegate is a tial mvs 03OrangeSVT 08-15-2010, 10:13 AM I would run a 10psi spring... if you're gonna run a minimum of 10psi then why waste time with anything lower. drunkinmonkey 08-15-2010, 10:14 AM that spring can handle up to 18psi?? 03OrangeSVT 08-15-2010, 10:19 AM Sure, your boost controller is what regulates how much pressure you run, the waste gate spring is basically for a "minumum" amount. I have a 10psi spring and I've ran well over 20psi on it. drunkinmonkey 08-15-2010, 10:27 AM awesome thanks whats 10psi give you inhorsepower terms...just a rough number if it helps the turbo is a 3071r Roushturboedzx3 08-15-2010, 10:53 AM On my old setup i ran a 8 psi spring and boosted 23psi on it, now i run a 15psi spring 03OrangeSVT 08-16-2010, 09:56 PM awesome thanks whats 10psi give you inhorsepower terms...just a rough number if it helps the turbo is a 3071r just a guess on a stock motor..... 240whp-ish drunkinmonkey 08-16-2010, 10:39 PM just a guess on a stock motor..... 240whp-ish damn not bad my motor isnt stock tho lmao its fully built for turbo just had to put the turbo part of the build on hold to fix an oil leak in the new motor....hope to see boost in spring also order my bov today TiAL Q 50mm | |