|
nlsolja123 09-28-2009, 05:50 AM Ok i got a safc for free and was wondering if i could use this at all on my car? I have 42lb injectors a 70mm calibrated maf for the injectors and this safc. would this be ok to use untill i can afford a xcal3 and a dyno tune? 1turbofocus 09-28-2009, 01:34 PM NO not even close , what do you have injectors that big you have boost ? If so dont even try the SAFC Tom nlsolja123 03-14-2010, 03:55 PM yes i have boost, 10 psi on a t04e, and cars running in closed loop untuned 1turbofocus 03-14-2010, 08:29 PM NO you are not safe not even close , basicly all you have done is manipulate the MAF voltage to the ECU You need to address the biggest thing and that Timing , Load , Base fuel and about a dozen other things that MUST be changed and then dozens of things that need to be adjusted Tom aTm Beaner 03-17-2010, 09:29 AM The Apexi SAFC II work really well on imports, but our computer doesn't seem to like it. I had one on my Nissan and it worked wonders. Just get an SCT Xcal for the tune. | |