04-20-2009, 10:27 PM
i have a 2002 svt focus with the 6 speed trans i was wandering is a 5 speed out of a reg. focus will bolt up in its place and what will i have to do ..if some one could help me with this info it would help me in a big way thanks TONY[wrenchin][idea]
04-20-2009, 10:41 PM
It would bolt up , you would have to change shifter cables and shifter , what I am not sure of is the clutch and fly , there is a BIG diff between the 2
04-21-2009, 02:01 AM
the clutch splines arent even close, you would need the clutch/fly as well
also passenger axle bearing mount
also a ECU tune to change the OSS holes scalar to 26 (unless you dont care about gaining miles 3x as slow and speedo being waaayyyyy too slow)
also a pair of non-SVT axles
shifter cables/shifter as mentioned earlier, would need to be of same era as the trans (00-02.5 or 02.5-04)
I might be forgetting something.
05-02-2009, 01:49 AM
What a bout the speed sensor pig tail? do this need changing also?
05-02-2009, 03:19 AM
i believe so yes
the reverse sensor pigtail I know is different.