03-17-2009, 09:40 PM
I was wondering what type of problems that you have ran into when you put your new suspension on.
I am getting the 1.5 drop from Mike so.... I need to know what to look for[wrenchin][bash][?|]
03-17-2009, 09:47 PM
i wouldn't think you would have any!
03-17-2009, 09:50 PM
the only problem is it wont stop there...the modding bug
03-17-2009, 10:22 PM
I just dropped mine close to 3", no problems yet
03-17-2009, 10:42 PM
i meant install problems --such as sticky bolts or anything like that
03-17-2009, 10:51 PM
The hardest part of my install was removing the mounting thing off the top of the stock front struts so it could be re-mounted on the new ones. It took two people and some Rem oil to get it done lol
03-17-2009, 11:56 PM
the rear control arm bolt sux big time
03-18-2009, 01:27 AM
Rust is your enemy, just use some good penetrating oil on the bolts before you decide to do the job and it should make it easier for you.
03-18-2009, 08:02 AM
I actually had the lower control are bolt siezed so we cut it out and I had to buy a new lower control arm...so yeah that was kind of a pain in the ass.
03-18-2009, 08:33 AM
considering yours is an 04, live in the south, i wouldn't think you would have any problems. Just get some pb blaster, and spray down all the bolts a day before the install. Oh and make sure u have all the tools for the install or ull be makin alot of trips to the autostore.
03-18-2009, 08:39 AM
^^^ i would say the same thing. That was the hardest part. Since mike sends them to you with the fronts already assembled you just swap the old fronts with his. Actually once you have the two lower control arm bolts out the back is quick and easy. It's just the damn bolts seizing that's everyones problem, but since you live in texas and not pittsburgh... i'd say your chances are better than mine.