02-12-2009, 08:47 PM
I have a 2002 SVTF with the Getrag 6 speed. I need the roller bearing that supports the countershaft on the bellhousing side of the transmission case. There are actually two of these and they appear identical to each other. I think my ideal situation would be if someone has one of these that blew up the clutch or flywheel and damaged the case. I figure I can cut the aluminum around the bearing to retreive it. If anyone has or knows of someone who has a parts tranny I would really appreciate them getting in touch with me. When looking at the bearing, the following numbers are on the plastic cage that locates the rollers. "INA" (the manufacturer) and ">PA66-GF25<" Apparently this is a propriatary bearing made just for Getrag and isn't available through industrial distributors.
02-13-2009, 12:02 PM
Let me check into this, I know we have some bearings for the Getrag.
02-14-2009, 11:41 AM
Thanks. Another identifier if you have the bearing out is part number F-233428 stamped on the outer race. This isn't visable when the bearing is pressed in. I'll PM you this information also.
02-14-2009, 12:31 PM
We got a parts tranny, take a pic of what you need
02-18-2009, 11:40 AM
I need to get the case back from a local guy who was looking through his inventory of parts trannys for a match. As soon as I can I'll take a pic and send it to you. Thanks for the reply.
02-19-2009, 07:40 PM
i have a complete spare trans except them because when my pressure plat exploded them were the only thing i could not get out.let me see if i still have the old bell housing.
edit sorry i must have junked it
03-06-2009, 12:17 AM
This link has some photos of what I'm looking for. Not the best, but should give an idea of what I need.
03-26-2009, 10:45 AM
I have a complete transmission I'd sell for $400. It was working perfectly when I took it out at 90k miles. I could meet you in Erie.