Darkstar Motorsports is currently gauging interest in custom interior plaques with your SVT build number on it. They will look something like this:

http://i327.photobucket.com/albums/k448/rotaryhead17/svt1.jpg

Specifications on the badge itself:

3" x 1" 1100 Alloy Aluminum with Brushed/Satin Finish with a hard anodized clear coat.
3M VHB (Very high bond) mounting tape
Strength: 25 lb/in of 90 degree peel adhesion strength (440 N/100mm)

Anodized / Clear Coat Specs:


Mil-P-514
Mil-P-15024D Type H & G
Federal Spec GG-P-455B

Description:

Chemically anodized black and blue dyes followed by a mil spec anodized clear top coat. The result is an image that is chemical resistant, and highly durable for outdoor applications in direct sunlight and in salt water conditions. The plate of metal itself would have to be destroyed to affect the image due to the state of the art manufacturing. Traditional silk screen or printed badges has color that can scratch off with your fingernail, and the colors fade in UV light... These military spec bad boys do not have a raised ink surface and will last a lifetime.

Each badge has been anodized and CNC cut from a sheet of 0.050" aluminum alloy sheet which is very robust. In addition, each badge is backed with 3M 4949 VHB Black foam tape. This is a premium mounting acrylic/rubber-like pad that will allow your badge to mount to your exterior paint, or textured surface plastics. Designed as an exterior fastener to replace rivets, spot welds, and liquid adhesives, 3M VHB is made of a viscoelastic acrylic foam that is energy absorbing with outstanding durability. (UL746C)



The acrylic adhesive is 100% resistant to full submersion in water, salt water, hydraulic fluid, 10w30 motor oil, and glycol antifreeze. 90% resistant to kerosene, 50% resistant to jet fuel, 35% resistant to gasoline, and 5% resistant to MEK (Methyl Ethyl Ketone).

If applied at room temperature, 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. The higher the temperatures, the faster the curing time.



If you have any questions you can either contact them directly or post up in this thread: http://www.focusfanatics.com/forum/showthread.php?t=183501

Thatd be a sweet mod to have

I think it would be THE perfect touch to the interior, would really add something to it without being gaudy.

I have interest. Use this instead of the vinyl numbers?

Yes it would, but you could have both, this on the inside, and the decal on the outside.

thanks jgustafson

Bump

Pic?

Interested. Pic and price?

Here is a pic of the badges I just made for the MX6 forums. We will be able to place your s/n and any 3 digit combination you want...

http://i464.photobucket.com/albums/rr3/darkstarmotorsports/Name%20Badges/ATT00004.jpg

Okay, so i want to dig this thread up from the dea, and get things rolling with these, since now I have a SVT of my own.

I'm thinking about getting really creative with these badges. Instead of just having a build number out of the total number of cars that year.

The price of these will be $25 shipped ANYWHERE, and I would need atleast 10 people interested to make them (well actaully 9 cause I want one)

I want it to have it say;

(02, 03, or 04) (ZX3 or ZX5) (build #) or (total number of that year)

Ex;

03 ZX3 #3458 of 6,158

And here's the image I would use;

http://i464.photobucket.com/albums/rr3/darkstarmotorsports/Name%20Badges/svt1.jpg

i deffenatly want one but i need a few weeks

i deff want one but i need about 2 weeks im in the midst of a deal on my new SVT [wiggle]

i deff want one but i need about 2 weeks im in the midst of a deal on my new SVT [wiggle]


you have plenty of time, I want to wait till we have enough interest

I'm interested, but i'd like a better idea or a pshop of what it would most likely look like before fully committing

1. Cheddar SVT (03 ZX3 #1163)
2. darkstarmotorsports (03 ZX3 #????)
3. $teve

I'm interested as Id like to have a plaque on the inside of the car passenger side of dash.

Would the red the SVT is printed in closely match the red inserted SVT seats?

I'm interested, but i'd like a better idea or a pshop of what it would most likely look like before fully committing

Here's a quick representation, but I'm not liking the front I'm going to redo it either tonight or tomorrow.

http://i464.photobucket.com/albums/rr3/darkstarmotorsports/Name%20Badges/svt2.jpg

I'm interested as Id like to have a plaque on the inside of the car passenger side of dash.

Would the red the SVT is printed in closely match the red inserted SVT seats?

No, it won't the inserts are more of a darker red

Also intersted, but agree with big red. I'd like it to be more plaque like, for the dash.

Also, I would prefer the total build # per year, like 1278 of 1978.

Also intersted, but agree with big red. I'd like it to be more plaque like, for the dash.

Also, I would prefer the total build # per year, like 1278 of 1978.

The badge itself is a nice size; 1"x 3"


And yes, it will be the total number per year. Everyone's total will not be the same unless you have the same year as someone else.

sweet, sign me up. One please!

1278 of 1978

2004 EAP

sweet, sign me up. One please!

1278 of 1978

2004 EAP

1. Cheddar SVT (03 ZX3 #1163)
2. darkstarmotorsports (03 ZX3 #????)
3. $teve
4. jasper46 (04 ZX3 #1278)

Revised Image;

http://i464.photobucket.com/albums/rr3/darkstarmotorsports/Name%20Badges/svt2-1.jpg

Are these going to be soft like the SVT Piranha badges Warneej (Evan) had made up, or are they going to be cut into a hard plastic or metal?

i dont like the comma. But when I hear the final idea ill make my decision.

Are these going to be soft like the SVT Piranha badges Warneej (Evan) had made up, or are they going to be cut into a hard plastic or metal?

1" x 3" Alum

i dont like the comma. But when I hear the final idea ill make my decision.


I can remove the comma, this is the final idea. If the majority of everyone wants the comma removed, then I'll remove it.

Without the comma. MMMM Aluminum....

Sign me up as well please!!!
DO WANT!

i might be intrested as well

Sign me up as well please!!!
DO WANT!

i might be intrested as well

http://i464.photobucket.com/albums/rr3/darkstarmotorsports/Name%20Badges/svt2.jpg

1. Cheddar SVT (03 ZX3 #1163)
2. darkstarmotorsports (03 ZX3 #????)
3. $teve
4. jasper46 (04 ZX3 #1278)
5. Everlastingboost (03 ZX3 #3267)
6. mmllemon

count me in as well. BigRed03 (03 ZX5 SVT #1943 of 2173)

count me in as well. BigRed03 (03 ZX5 SVT #1943 of 2173)

1. Cheddar SVT (03 ZX3 #1163)
2. darkstarmotorsports (03 ZX3 #????)
3. $teve
4. jasper46 (04 ZX3 #1278)
5. Everlastingboost (03 ZX3 #3267)
6. mmllemon
7. BigRed03 (03 ZX5 SVT #1943 of 2173)

Anybody else? How many do you need to start making them, 10? If you need more cash per item tell me, I want mine now lol.

Anybody else? How many do you need to start making them, 10? If you need more cash per item tell me, I want mine now lol.

LOL, damn! I love that type of commitment!

I was hoping to get a huge list of people.

I would love a plaque however I dont know the production number of my vehicle whats the easiest way of going about getting it?

call 1-800-FORD-SVT

The menu will direct you to the correct department

and I think you'll need the last 8 digits of your vin#

it's super easy and fast.

You can also order a new build certificate for 40 bucks!

lildudeinacar (03 ZX3 SVT #2002 of 3985)


Thumbing though some of the other pages linked to this, and i must have missed it... But.. Whats the ChaChing... not that it matters to me, but just wondering.

1. Cheddar SVT (03 ZX3 #1163)
2. darkstarmotorsports (03 ZX3 #????)
3. $teve
4. jasper46 (04 ZX3 #1278)
5. Everlastingboost (03 ZX3 #3267)
6. mmllemon
7. BigRed03 (03 ZX5 SVT #1943 of 2173)
8. lildudeinacar (03 ZX3 SVT #2002 of 3985)

Whats the price again?>

The price of these will be $25 shipped ANYWHERE

how many people do we need? i should have my svt wensday! finally :tup:

arrrrrrrrr, we're getting closer! want my plaque, need my plaque, can't wait to get my plaque, gotta have my plaque!

duce duce!!!

just need a min of 2 more people.

I don't want to rain on the parade cuz I like the idea....but, if it's a flat aluminum piece where does everyone plan to mount it? I don't think there's a flat spot on the dash anywhere.

It can probably be bent to fit? We are talking thin aluminum not steel. Also I was thinking of putting mine in the engine bay(I will probably put some form of high temp engine enamel over the plaque). At any rate let's get these dang things ordered!!! FREE BUMPITY BUMP!!

ditto! Lets get these ordered. We need to round up a couple more svt's!

Here's a quick representation, but I'm not liking the front I'm going to redo it either tonight or tomorrow.

http://i464.photobucket.com/albums/rr3/darkstarmotorsports/Name%20Badges/svt2.jpg

id get rid of the part that says zx3

i do like that, But where it says 2003 ZX3, I would want my SN there..

id get rid of the part that says zx3

I can gte rid of the ZX3 or ZX5 if everyone wants that.

i do like that, But where it says 2003 ZX3, I would want my SN there..


I could do that, but with sn/n like yours, everything will be bunched up, and won't look right.

how can i find my build number

Sign me up. 2003 #1606. I also dont like the ZX3 part.

Sign me up. 2003 #1606. I also dont like the ZX3 part.

1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????)
3. $teve
4. jasper46 (04 SVTF #1278)
5. Everlastingboost (03SVTF #3267)
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173)
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606)


I will remove the ZX3/ZX5 part

Could I see a shot of the plate it would be on, sans typeface?

Actually any surface will work

Actually any surface will work

What Im asking is to see a shot of the unfinished product, if available. I see the Mazda ones on the first page, will these be similar? What will the dimensions be? Plastic badge? Steel? Aluminum?

Sorry for the questions, Im just curious and trying to get as much info as I can before I decide to order one. Thanks!

They will be similar with a white background.

Taken from the first page;

Specifications on the badge itself:

3" x 1" 1100 Alloy Aluminum with Brushed/Satin Finish with a hard anodized clear coat.
3M VHB (Very high bond) mounting tape
Strength: 25 lb/in of 90 degree peel adhesion strength (440 N/100mm)

Anodized / Clear Coat Specs:


Mil-P-514
Mil-P-15024D Type H & G
Federal Spec GG-P-455B

Description:

Chemically anodized black and blue dyes followed by a mil spec anodized clear top coat. The result is an image that is chemical resistant, and highly durable for outdoor applications in direct sunlight and in salt water conditions. The plate of metal itself would have to be destroyed to affect the image due to the state of the art manufacturing. Traditional silk screen or printed badges has color that can scratch off with your fingernail, and the colors fade in UV light... These military spec bad boys do not have a raised ink surface and will last a lifetime.

Each badge has been anodized and CNC cut from a sheet of 0.050" aluminum alloy sheet which is very robust. In addition, each badge is backed with 3M 4949 VHB Black foam tape. This is a premium mounting acrylic/rubber-like pad that will allow your badge to mount to your exterior paint, or textured surface plastics. Designed as an exterior fastener to replace rivets, spot welds, and liquid adhesives, 3M VHB is made of a viscoelastic acrylic foam that is energy absorbing with outstanding durability. (UL746C)



The acrylic adhesive is 100% resistant to full submersion in water, salt water, hydraulic fluid, 10w30 motor oil, and glycol antifreeze. 90% resistant to kerosene, 50% resistant to jet fuel, 35% resistant to gasoline, and 5% resistant to MEK (Methyl Ethyl Ketone).

If applied at room temperature, 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. The higher the temperatures, the faster the curing time.

Willl you ship to Europe ? Could you send me cost of everything to my PM ?
Thx

I'll take one. No zx3 in it though. I have a 2002 #2633 of 4788.

They will be similar with a white background.

Taken from the first page;

Specifications on the badge itself:

3" x 1" 1100 Alloy Aluminum with Brushed/Satin Finish with a hard anodized clear coat.
3M VHB (Very high bond) mounting tape
Strength: 25 lb/in of 90 degree peel adhesion strength (440 N/100mm)

Anodized / Clear Coat Specs:


Mil-P-514
Mil-P-15024D Type H & G
Federal Spec GG-P-455B

Description:

Chemically anodized black and blue dyes followed by a mil spec anodized clear top coat. The result is an image that is chemical resistant, and highly durable for outdoor applications in direct sunlight and in salt water conditions. The plate of metal itself would have to be destroyed to affect the image due to the state of the art manufacturing. Traditional silk screen or printed badges has color that can scratch off with your fingernail, and the colors fade in UV light... These military spec bad boys do not have a raised ink surface and will last a lifetime.

Each badge has been anodized and CNC cut from a sheet of 0.050" aluminum alloy sheet which is very robust. In addition, each badge is backed with 3M 4949 VHB Black foam tape. This is a premium mounting acrylic/rubber-like pad that will allow your badge to mount to your exterior paint, or textured surface plastics. Designed as an exterior fastener to replace rivets, spot welds, and liquid adhesives, 3M VHB is made of a viscoelastic acrylic foam that is energy absorbing with outstanding durability. (UL746C)



The acrylic adhesive is 100% resistant to full submersion in water, salt water, hydraulic fluid, 10w30 motor oil, and glycol antifreeze. 90% resistant to kerosene, 50% resistant to jet fuel, 35% resistant to gasoline, and 5% resistant to MEK (Methyl Ethyl Ketone).

If applied at room temperature, 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. The higher the temperatures, the faster the curing time.

Thanks for the description! VERY informative! Once you get these done, can you send me a photo of the finished product, please?

I'm interested.
I'd like to see the final product first...

Screamin SVT (03 SVTF #2242 of 3985)

Willl you ship to Europe ? Could you send me cost of everything to my PM ?
Thx

Same cost..

I'll take one. No zx3 in it though. I have a 2002 #2633 of 4788.


1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????)
3. $teve
4. jasper46 (04 SVTF #1278)
5. Everlastingboost (03SVTF #3267)
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173)
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606)
10. macdiesel (02 SVTF #2633 of 4788)
11. Screamin SVT (03 SVTF #2242 of 3985)



So we have 11 people, anyone else want to jump on this, before i send the order out?

The price of these will be $25 shipped ANYWHERE, and I would need atleast 10 people interested to make them (well actaully 9 cause I want one)

Will you pm'ing people when this goes down for payment info?

Will you pm'ing people when this goes down for payment info?

Actually what I have seen that works best in the past, is ask for a 50%($12.50) deposit since these are custom made for each member. It takes about 1-2 weeks for them to get made after I have ALL deposits in. Then once they are ready, I'll post a pic of the completed badges, and send a invoice to all those who paid the (50%) and just ship them out from there.

Since we have more than 10 people wantsing to do this. I'll start collecting deposits ($12.50) now. I'll give everyone a week (till 9/25) to get their deposit in, then that Firday I'll place the order for these to be made.

our paypal is darkstarmotorsports@yahoo.com

http://i464.photobucket.com/albums/rr3/darkstarmotorsports/Name%20Badges/svt2.jpg

Done. Thanks...

Done. Thanks...

1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????)DP PAID
3. $teve
4. jasper46 (04 SVTF #1278)
5. Everlastingboost (03SVTF #3267)
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173)
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606)
10. macdiesel (02 SVTF #2633 of 4788)
11. Screamin SVT (03 SVTF #2242 of 3985) DP PAID

Just sent you the funds(I sent the full amount, why have paypal take money out of your funds twice?). At any rate thanks man!

sent the deposit. I liked the zx3 or zx5 in there because the build numbers are different. But it looks good this way too!

Just sent you the funds(I sent the full amount, why have paypal take money out of your funds twice?). At any rate thanks man!

What's your paypal email address?

I didn't get a full payment from anyone.

1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????)DP PAID
3. $teve
4. jasper46 (04 SVTF #1278)
5. Everlastingboost (03SVTF #3267)
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173) DP PAID
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606)
10. macdiesel (02 SVTF #2633 of 4788)
11. Screamin SVT (03 SVTF #2242 of 3985) DP PAID

I re-sent the full payment hopefully you get it this time?



What's your paypal email address?

I didn't get a full payment from anyone.

1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????)DP PAID
3. $teve
4. jasper46 (04 SVTF #1278)
5. Everlastingboost (03SVTF #3267)
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173) DP PAID
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606)
10. macdiesel (02 SVTF #2633 of 4788)
11. Screamin SVT (03 SVTF #2242 of 3985) DP PAID

Deposit just sent. Is it cool if my number says 1606 of 3985? I want the number for the ZX3 but no ZX3 on the actual plate.

1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????)DP PAID
3. $teve
4. jasper46 (04 SVTF #1278)
5. Everlastingboost (03SVTF #3267) PAID FULL
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173) PAID FULL
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606) DP PAID
10. macdiesel (02 SVTF #2633 of 4788)
11. Screamin SVT (03 SVTF #2242 of 3985) DP PAID

Deposit sent via paypal. Can't wait.

Deposit sent via paypal. Can't wait.

Got it!!

1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????)DP PAID
3. $teve
4. jasper46 (04 SVTF #1278)
5. Everlastingboost (03SVTF #3267) PAID FULL
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173) PAID FULL
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606) DP PAID
10. macdiesel (02 SVTF #2633 of 4788) DP PAID
11. Screamin SVT (03 SVTF #2242 of 3985) DP PAID

I sent payment-did you get it?

I sent payment-did you get it?

PM me your paypal email address.





ALSO, if everyone could please include their s/n in the paypal payent description.

One more day left...


1. Cheddar SVT (03 SVTF #1163)
2. darkstarmotorsports (03 SVTF #????) PAID FULL
3. $teve
4. jasper46 (04 SVTF #1278) PAID FULL
5. Everlastingboost (03SVTF #3267) PAID FULL
6. mmllemon
7. BigRed03 (03 SVTF #1943 of 2173) PAID FULL
8. lildudeinacar (03 SVTF #2002 of 3985)
9. Slow03 (03 SVTF #1606) DP PAID
10. macdiesel (02 SVTF #2633 of 4788) DP PAID
11. Screamin SVT (03 SVTF #2242 of 3985) DP PAID

Mine will say #1606 of 3985 correct?

Mine will say #1606 of 3985 correct?


Yes correct. This is who i have all signed up.


2. darkstarmotorsports (03 SVTF #???? of 6,158) PAID FULL

4. jasper46 (04 SVTF #1278 of 3,057) PAID FULL
5. Everlastingboost (03 SVTF #3267 of 6,158) PAID FULL

7. BigRed03 (03 SVTF #1943 of 6,158) PAID FULL

9. Slow03 (03 SVTF #1606 of 6,158) DP PAID
10. macdiesel (02 SVTF #2633 of 4,788) DP PAID
11. Screamin SVT (03 SVTF #2242 of 6,158) DP PAID

Wonder what the other guys are doing? Have you sent them p/m yet?

waiting patiently for my badge....

Wonder what the other guys are doing? Have you sent them p/m yet?
Sounds about right for a group buy. A few fall out. When I was in the harnass bar group buy we had to get 30 people. Trust me, it took a while and even then some bailed.

waiting patiently for my badge....

Don't worry, the order has been placed, and they are being made as I type this.

..... oh.... well never mind then iguess...
Sounds like i got the shaft

Shouldn't I of gotten a Pm like some else stated? Like hey are u still interested?
I didnt even know Down payments were being taken
And if i would of know that then i would of been person #8 of the 9 you were hoping for.

Don't mean to be a negative nancy or a debbie downer or anything... Guess i wont be part of the cool Kids club

when will these be in and when do you want final payment?

..... oh.... well never mind then iguess...
Sounds like i got the shaft

Shouldn't I of gotten a Pm like some else stated? Like hey are u still interested?
I didnt even know Down payments were being taken
And if i would of know that then i would of been person #8 of the 9 you were hoping for.

Don't mean to be a negative nancy or a debbie downer or anything... Guess i wont be part of the cool Kids club

Why didn't you subscribe to the thread?

shouldnt the vendor send out a pm for a product that he is selling.. still saying Hey! Time is almost out........ insert 20 bucks to cont.

shouldnt the vendor send out a pm for a product that he is selling.. Still saying hey! Time is almost out........ Insert 20 bucks to cont.

this isn't an arcade game lol, so any udpate darkstar, my car feels naked without this shiny new plaque yo!

your right... but its something that i was intrested in... Oh well i am over it

do I get a free one?

update?

Anybody get their plaque yet?

anyone? *crickets*

*crickets respond* No

A response would be good.... Anyone p/m darkstar yet?

P/M'd him tonight, hopefully I'll get a response.

lol...

?????????????

*jeporady theme*

I've heard nothing since everyone sent their money....

I tried to pay my balance and PayPal said that memeber was not accepting payments.

Hmmmmmm...

I've heard nothing since everyone sent their money....

I tried to pay my balance and PayPal said that memeber was not accepting payments.

Hmmmmmm...


That's strange. I wonder what the hell is going on.

Hopefully DarkStar will chime in with an update....

Reminds me of an old song "take the money and run".

j/k

Im sure he's not like that. I hope. LOL

Last Activity: 10-27-2009 03:48 AM

It's been over a week...

Maybe something happened. Seems like a lot of work to scam for a $100. Hopefully everything is alright.

still no response to my pm from 10-23-09, arg!

$12.50 in the scheme of things isn't a big deal, but it still sucks..... if it comes in great, but w/e.

anyone try calling him?

http://www.darkstarmotorsports.com/index_files/Page394.htm

I really don't think he bailed on everyone, possibly something serious happened??
Hopefully he is ok.

No one got one.

There is another outstanding seller issue against Darkstarmotorsports on the Cougar forum right now as well.

http://www.newcougar.org/forums/transaction-feedback/140765-darkstarmotorsports.html

Man for only 100 bucks? Lame!!! Oh well... do i smell a ban? Glad I didn't buy anthing else from this guy. Thieves need to burn!

Something had to happen. His seller ratings on this site look good. Allot of positive feedback. And he hasn't been on FJ in just as long. Again, just looks like allot of work for a $100, gathering a group buy together and all. Jail, rehab, or medical would be my guess. Hopefully he'll be back soon.

I hope this will go through cause I really want the item. I just hope he is doing ok.

Ditto!

still nothing :(

still nothing :(

dam that sucks i kinda thinking about one but not now

Any update? This sucks, i was looking forward to this plaque. How lame....

Throw in the towel, gents.

Wonder if Paypal will credit the money back. Guess I should read the fine print.. lol

This sucks for all that were involved. I almost got one but I'm glad I didn't. Open a case with Paypal, they should credit your account if you payed that way.

This sucks for all that were involved. I almost got one but I'm glad I didn't. Open a case with Paypal, they should credit your account if you payed that way.

Probably not; there is a time limit to file PayPal claims. I think it's 45 days; maybe even 30 days. Worth a shot, though...

Even the web page is gone now... Lesson learned I suppose.

Found this recently:
http://www.darkstar-motorsports.com/DarkstarHome.htm
http://www.mysubie.com/vendor?id=1274

No way of knowing whether it's the same people or not.

sorry to all that lost their money...lesson learned i guess? or has someone heard from him? maybe someone can look into his account info and what not? maybe? idk...?

good job gustafson! btw call me!

Thats it. I'm leaving negative feedback.

Shame that he scammed you all, he flooded several other sites i'm on with inferior quality parts, and extremely long manufacturing times.