05-04-2008, 01:00 AM
So im sucking the fuel pump basket dry, The car will not rev past 6500 rpms when in boost. One time it did alow me to go to 6800. ( fuel cut is set at 8K MSD is set at 7600 ) and full tank of gas.
So I keep hearing drilling holes in the basket, but im wondering where exactly and how big of holes and how many??
05-04-2008, 11:46 AM
You have a PM
whats not included in the PM is that i drilled about 5 holes on the front side of the basket. Make sure you get that part straight so you trap the fuel in the basket. i used a pretty small drill bit I think it was like a 1/8" or something not to big like that.
05-04-2008, 06:25 PM
Once you drill holes in the tank (need to be 4 to 6 and 3/8 at least) then as your fuel gets low and you take off you will not have much fuel in the Res/basket , this will kill your engine just as fast , you have to keep it at 1/2 tank+ to be safe